Duplo DC-516, Instruction Manual

Page: 84 / 142

Programming a JOB
66
-2%5(*0DUN
/HDG0DUN PP
㸦㸧
6(7
REG Mark
Enter the distance between the lead edge of a
document and the lead mark (REG mark) with the
NUMERIC keys.
Touch
SET .
㸦㸧
-2%&UHDVH6/27
PP &UHDVH
6(7
㸦㸧
-2%&UHDVH6/27
PP &UHDVH
6(7
● When the creaser module is set in the module 1
Enter the distance between the lead edge of a
document and the
fi rst crease position.
Touch SET .
You can set up to 20 creases.
If you
fi nish the setting with fewer than 20 creases,
touch SET after entering the last crease position
and then touch SET again.
-2%6OLW
6OLW PP
㸦㸧
$
'
*
%
&
( +
)
6(7
ۂ
ۂ
-2%6OLW6ORW
6OLW PP
㸦㸧
6(7
If you fi nish the setting with the fewer number of the
slitter units installed, touch SET after entering the
last slit position and then touch SET again.
You can install up to 10 slitter units to the slitter
module .
● When the slit module is set in the module 1
Enter the distance between the lead edge of a
document and the
fi rst slit position.
Touch SET .
One or more slit position is necessary to use the
slitter module.
REFERENCE