manualshive.com logo in svg

Duplo DC-516, Instruction Manual

The Duplo DC-516 is a versatile and efficient paper folder with precise folding capabilities. Easily set up and operate this machine with the included Instruction Manual. For a free download of the manual, visit our website and get the most out of your Duplo DC-516 experience.

Share
Download
background image

2

5

Part Names and Their Functions

Before Using This Machine

1

Creaser Module

No.

Name

Function

1

Creaser tool (convex)

You can pull the creaser tool out with the creaser module installed 
in the machine and change directions (up/down) of the tool.

2

Creaser tool (concave 
tool)

You can pull the creaser tool out with the creaser module installed 
in the machine and change directions (up/down) of the tool.

Do not run the DC-516 without 

creaser tools

 (convex and concave tools) while the 

creaser module

 is installed in it.

Be sure to pull them out before removing the 

creaser module

 from the DC-516.

You cannot remove the 

creaser module

 with the 

creaser tools

 (convex and concave 

tools) attached to it.

IMPORTANT

1

2

Summary of Contents for DC-516















































































































































Reviews:

No comments

Related manuals for DC-516

Brands by name

Popular brands

Load more brands