manualshive.com logo in svg

Duplo DC-516, Instruction Manual

The Duplo DC-516 is a versatile and efficient paper folder with precise folding capabilities. Easily set up and operate this machine with the included Instruction Manual. For a free download of the manual, visit our website and get the most out of your Duplo DC-516 experience.

Share
Download
background image

2

27

Slitter Modules

Before Using This Machine

1

 How to Use the Gauge

Ex). When making margins 20 mm wide.

Set the scale of the 

gauge

 to 70.0 mm.

Adjust the scale to the dimension between slits to be 
made.

When adjusting margins, set the scale to “margin 
dim50 mm”.

Divisions can be adjusted by 0.05 mm.
One division is 0.05 mm.
Read the division of the vernier when the vernier and 
the main scale are aligned in a straight line. The right 

fi

 gure shows that the 

gauge

 is set to 70.25 mm.

REFERENCE

 Gauge 

(for gutter)

 Main scale

 Vernier

70.25 mm

70.0 mm

Main scale

Vernier

Main scale

Vernier

Summary of Contents for DC-516















































































































































Reviews:

No comments

Related manuals for DC-516

Brands by name

Popular brands

Load more brands