Duplo DC-516, Instruction Manual

Page: 82 / 142

Programming a JOB
64
$ &UHDVH
0RGXOH6HOHFW7RRO
&UHDVH
6(7
7ULP5 <(6
0RGXOH6HOHFW7RRO
6OLW
7ULP/ <(6
6(7
-2%3URJUDPPLQJ
7HPSODWH :L]DUG $GYDQFHG
0RGXOH6HOHFW7RRO
6WDQGDUG
6(7
Programming a JOB with Advanced
REFERENCE
Template : This helps you program a JOB in a
simple way by selecting from the list
of the document size and the
fi nished
products.
Wizard : This helps you program a JOB in a user
size in a simple way.
Advanced
: This programs JOB by entering a value
of each item.
● Crease (creaser module)
Touching the left/right icon in the second line
switches the displays between Crease ↑ and Crease
↓ .
Select the direction of the creaser tool (upward/
downward) and touch
SET .
● Slit (slitter module)
Touching the left/right icon in the second or third
line switches the display between YES and NO in
Trim R and Trim L .
Select YES or NO for each slit and touch SET .
Follow steps 1 to 6 in Programming a JOB with Template. ( → P.50)
JOB Programming
Touch Advanced .
Module 1 / Select Tool
Touching the left/right icon switches the displays in
the order of Standard , Crease , and Slit . (Optional
modules which are not set are not displayed.)
Select a module.
The
fi gure on the right shows Standard .
If you use the standard module , touch SET .
The settable values are displayed in the lower left part of the screen.