Duplo DC-516, Instruction Manual

Page: 101 / 142

83
3
Basic Operations
$GMXVWࠉࠉࠉ&87
&XWWHU6SHHG
6(7
6/2:
)$67
6WDQGDUG 2WKHUV
&87
Adjust
REFERENCE
5HWULHYH-2%
(QWHU-2%
$GMXVW
3URFHVV
6\VWHP
(QYLURPHQW
&2817
6+76
- +
Make sure that the standby screen is displayed on
the touch panel.
Touch Adjust .
Adjust − Slot 2
When the cutter module is installed in slot 2 .
Cutter Speed : Select cutter speed from FAST or
SLOW .
You cannot select cutter speed when the creaser
module or the CPM module are installed.
Speed
This is used to select processing speed.
Apply Shrinkage
In case printed documents are shrunk or expanded by heat generated on digital printer, by
entering the original document size and the document size after they are shrunk/expanded,
the DC-516 automatically calculates the shrinkage/expansion ratio and adjusts the creasing
position accordingly.
This function is also effective when
fi nished documents are shrunk or expanded due to
document types or document surface status.
This function compensates for the shrinkage or expansion in the feed direction.
Adjust All
This corrects the document position in a vertical direction against the JOB set.
Last cut adj.
This corrects the trail cut position of the last fi nished product in a direction against the JOB set.
Cutter Speed
This is used to select cutter speed.
The default is
FAST .