Version 5.01 – July 2012 / SW Version: 2012.06.12Errore. Per applicare Nadpis 1 al testo da visualizzare in questo punto, utilizzare la scheda Home.
© DRC Srl 2012
96/102
-
depress the
PXX->USB
key –
D1000->USB ?
message will be displayed at the
display bottom. Depress the appropriate yellow Execution Key:
CANCEL
– to cancel operation,
P0x_*.*
– to save all pictures from the group P0x or
P01..09
– to save all pictures from all groups;
NOTE: Pictures from the chosen picture group will be saved to USB memory stick
in “D1000/pictures/XX-XXX” folder (XX-XXX is the instrument serial No.)
including all appropriate setups and data files.
The complete display content (“frozen” picture) is saved in .png format to
the chosen picture group.
All setup parameters for each picture are saved in *.stp file, with A-scan in
digital form (*.dat file 1024 max. values for FW waveform and 2048
max.-min. pairs for RF waveform – for research purposes or for import to
Excel).
Depending on the
EXPORT
setting (
csv
,
csv+html_1
,
csv+html_2
) in
menu (see 3.10), setup parameters for each picture are saved also in *.csv
file (all parameters with values only) and *.htm file (all parameters with
values, including the screenshot – two different formats).
If BSCAN had been activated, then last measured data are saved as well in
*.txt file.
10.4 Load Records From USB Memory Stick
Records (pictures) files shall be saved from the computer to the USB memory stick in
“D1000\pictures\” folder in advance.
-
connect the USB memory stick to the USB port of the instrument;
-
depress the
key – switch to special help mode;
-
depress
USB->Pxx
key – records from the USB memory stick will be loaded to the
instrument.
?
?
