Version 5.01 – July 2012 / SW Version: 2012.06.12Errore. Per applicare Nadpis 1 al testo da visualizzare in questo punto, utilizzare la scheda Ho
© DRC Srl 2012
95/102
10. USB Functions
NOTES: Any USB function may be cancelled during searching for the disc by
depressing the Esc key.
If there is no “D1000” folder on the USB device (flash memory), then all
appropriate folders will be created automatically.
For proper function of USB device (flash memory), it shall be properly
disconnected from the PC (using appropriate system function), otherwise it
may be recognized by the instrument as Read Only.
10.1 Save Setups To USB Memory Stick
-
connect the USB memory stick to the USB port of the instrument;
-
depress the
key – switch to special help mode;
-
depress
SETUPS
key;
-
depress
STP->USB
key – send setups to the USB port, which will be saved in
“D1000\setups\” folder.
10.2 Load Setups From USB Memory Stick
Setup files shall be saved from the computer to the USB memory stick in
“D1000\setups\” folder in advance.
-
connect the USB memory stick to the USB port of the instrument;
-
depress the
key – switch to special help mode;
-
depress
SETUPS
key;
-
depress
STP<-USB
key – setups from the USB memory stick will be loaded to the
instrument.
10.3 Save Pictures (Screenshots) And Data To USB Memory Stick
In order to upload pictures, which had been saved in the instrument (see 3.6.2), to
the USB memory stick,
-
connect the USB memory stick to the USB port of the instrument;
-
activate picture listing mode (see 3.7.2) by depressing the Display Freeze key;
-
select the desired memory group (PIC_01 to PIC_09) by depressing the
appropriate Execution Key (yellow) – memory group number changes by 1 after
each depressing;
-
depress the
key – the last picture from the list within actual group (in
alphabetical order) will be displayed on the screen;
?
?
