Doran 2200 Series, Instruction Manual

Page: 58 / 136

57
Default Batch Sequence
Line
Number
Command
Instruction
Description
00 CLR ALL OUTPUTS All Outputs are non-active.
01 WAIT UNTIL STABLE Wait until indicator is stable.
02 PUSH BUTTON ZERO Push button Zero.
03 SET OUTPUT 1 Output 1 is active.
04 WAIT FOR SETPOINT 1 Wait until setpoint 1 is active.
05 CLR OUTPUT 1 Output 1 is non-active.
06 WAIT UNTIL STABLE Wait until indicator is stable.
07 PUSH BUTTON TARE Push button Tare.
08 SET OUTPUT 2 Output 2 is active.
09 WAIT FOR SETPOINT 2 Wait until setpoint 2 is active.
10 CLR OUTPUT 2 Output 2 is non-active.
11 WAIT UNTIL STABLE Wait until indicator is stable.
12 PUSH BUTTON TARE Push button Tare.
13 SET OUTPUT 3 Output 3 is active.
14 WAIT FOR SETPOINT 3 Wait until setpoint 3 is active.
15 CLR OUTPUT 3 Output 3 is non-active.
16 WAIT UNTIL STABLE Wait until indicator is stable.
17 PUSH BUTTON TARE Push button Tare.
18 SET OUTPUT 4 Output 4 is active.
19 WAIT FOR SETPOINT 4 Wait until setpoint 4 is active.
20 CLR OUTPUT 4 Output 4 is non-active.
21 WAIT UNTIL STABLE Wait until indicator is stable.
22 GROSS Indicator is set for gross mode.
23 WAIT 00 Pause until START button is pressed.
24 GLOBAL REPEAT 00 Global repeat back to line 00.
25 END OF BATCH End of batching sequence.
Batch Configuration
Operation Mode Menu (
oP
)
Parameter:
oP
=
bAt
or
bAn
Setpoint Operation Menu (
S.o.
)
Parameter:
SP1
=
HA
,
SP2
=
HA
,
SP3
=
HA
,
SP4
=
HA
Test Mode Menu (XXXXXX)
Operation Menu (
out 1
,
out 2
,
out 3
,
out 4
)
Parameter:
oI
=
BAt
(all four outputs)