Doran 2200 Series, Instruction Manual

Page: 26 / 136

25
1. Press PROD ID once (or twice) to enter the Data Field edit mode. The display will
show
FiELd 1
, followed by the Data Field value. Press PROD ID again to scroll to
the next available Data Field. Up to eight Data Fields can be accessed, (see PROD
ID pb mode (
id
) parameter in the Push button sub menu).
Using Doran’s optional barcode scanner, scan the desired barcode. The display will
read
------
to represent the barcode value. To exit the Data Field edit mode, press
ENTER.
2. When the scale is in the normal weighing operation, use Doran’s optional barcode
scanner to scan in the desired barcode. The barcode value requires a special
prefaced command of Efx (x=1-8) to be added along with the data to be stored for
the selected Data Field. See the Remote Data Field Entry and Recall section.
Setting Time and Date
Press and hold the decimal point button on the keypad until
date
is displayed. The
current date flashes on the display. To toggle between the current time and date, press
the decimal point button. When time is displayed
tinne
is shown on the display.
To change the date, display the date and enter the month, followed by the day and the
year. Press UNITS or PRINT to change the current selection. The field that is being
edited flashes on the display. Enter a leading zero when entering a single digit year,
month or day. Press UNITS until the display reads
saved
to confirm the date changes
are saved.
To change the time, display the current time and enter the time in 24 hour format. Press
UNITS or PRINT to change the current selection. The field that is being edited flashes
on the display. Enter a leading zero when entering a single digit hour, minute or second.
Press UNITS until the display reads
saved
to confirm that the date changes are saved.
Press ENTER to return to the normal weighing mode.
NOTE: Time and Date entry is disabled when Operating mode
oP
is set to Alarm mode
ALt
.
If the time or date clock function has failed, an “
ER CLO
” error message is momentarily
shown after time or date has been entered.
User ID login
With the display showing
LogIn
, enter in through the keypad up to 20 digits for a user ID
number. The User ID entered is compared with a list of User IDs stored in the scale’s