Doran 2200 Series, Instruction Manual

Page: 20 / 136

19
turn on. If the item is lighter than the low limit, the UNDER indicator will flash. If the
item is heavier than the low limit but lighter than the under limit, the UNDER indicator
will turn on. If the weight is heavier than the under limit but lighter than the over limit,
the ACCEPT indicator will light.
NOTE: The Five band checkweighing mode is available in four different configurations
("
5BA
", "
5BS
", "
5Bt
", "
5Bb
"). See the Check Weighing Operation parameter "
C.o.
" for
more details.
Display Check Limit Values (2200CW)
Press OVER or UNDER to display the current check limit values. (Or for 5 Band Check
weighing operation, press and hold OVER for the HIGH limit or UNDER for the LOW
limit.) Press UNITS or PRINT to scroll between the available check limits. The top light
bars and the main display will indicate which check limit is being displayed (
High
,
over
,
under
,
Louu
). Press CLEAR to exit this mode. The display will read
abort
to indicate
no changes were made to the check limit values.
Press ZERO to momentarily display the current parameter settings and output logic for
that individual check limit.
Change Check Limit Values (2200CW)
Press OVER or UNDER to enter the check limit edit mode. (Or for 5 Band Check
weighing operation, press and hold OVER for the HIGH limit or UNDER for the LOW
limit.) The top light bars and the main display will indicate which check limit is being
displayed(
High
,
over
,
under
,
Louu
).
To change the check limit value, enter the weight value using the numeric keypad.
Press ENTER to accept the change and return to the weigh mode. The display will read
SaVed
to indicate the check limit value is saved. Or, press UNITS or PRINT to save and
edit other check limits.
Press CLEAR to exit this mode. The display will read
abort
to indicate no changes
were made to the check limit values.
Barcode Entry of Check Limit Values (2200CW)
Press OVER or UNDER to enter the check limit edit mode. The display will momentarily
show
over
or
under
, then flash the current limit weight. Press UNITS or PRINT to
scroll to the desired check limit. The top light bars and the main display will indicate
which check limit is being displayed(
High
,
over
,
under
,
Louu
). Using Doran’s optional
barcode scanner, scan the desired barcode. The display will read
SAVEd
to indicate the
scanned weight is saved. The display will flash the new check limit weight scanned from
the barcode. No special serial commands are needed prior to the weight data in barcode
value. The barcode value must not exceed the indicator's count by resolution and cannot
be greater than the capacity. The barcode value can be read into each of the available
check limits. To exit the edit mode, press the ENTER button.