manualshive.com logo in svg

Dodge 2011 Challenger SRT, Owner'S Manual

The Dodge 2011 Challenger SRT is a powerful and stylish car that combines classic muscle car design with modern performance. To fully understand and maximize the potential of this exceptional vehicle, it is crucial to have the Owner's Manual. You can conveniently download the manual for free from manualshive.com, ensuring a seamless and enjoyable ownership experience.

Share
Download
background image

out only the amount of webbing necessary to comfort-
ably wrap around the occupant’s mid-section. Slide the
latch plate into the buckle until you hear a

⬙

click.

⬙

Automatic Locking Retractor Mode (ALR) —
If Equipped

In this mode, the shoulder belt is automatically pre-
locked. The belt will still retract to remove any slack in
the shoulder belt. The Automatic Locking Mode is avail-
able on all passenger-seating positions with a combina-
tion lap/shoulder belt. Use the Automatic Locking Mode
anytime a child safety seat is installed in a seating
position that has a belt with this feature. Children
12 years old and under should always be properly
restrained in the rear seat.

How To Engage The Automatic Locking Mode

1. Buckle the combination lap and shoulder belt.

2. Grasp the shoulder portion and pull downward until
the entire belt is extracted.

3. Allow the belt to retract. As the belt retracts, you will
hear a clicking sound. This indicates the safety belt is
now in the Automatic Locking Mode.

How To Disengage The Automatic Locking Mode

Unbuckle the combination lap/shoulder belt and allow it
to retract completely to disengage the Automatic Locking
Mode and activate the vehicle sensitive (emergency)
locking mode.

WARNING!

•

The belt and retractor assembly must be replaced
if the seat belt assembly Automatic Locking Re-
tractor (ALR) feature or any other seat belt func-
tion is not working properly when checked ac-
cording to the procedures in the Service Manual.

•

Failure to replace the belt and retractor assembly
could increase the risk of injury in collisions.

52

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Summary of Contents for 2011 Challenger SRT












































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2011 Challenger SRT

N-Com B3 User Instructions And Safety preview
B3
Brand: N-Com Pages: 28
Pyle PLCMRV8B Black User Manual preview
PLCMRV8B Black
Brand: Pyle Pages: 4
MAXWORKS 70275 Instruction Manual & Parts Catalogue preview
70275
Brand: MAXWORKS Pages: 7
Webasto CC4E Installation And Service Instructions Manual preview
CC4E
Brand: Webasto Pages: 34
Westfalia 305 158 Mounting Instructions preview
305 158
Brand: Westfalia Pages: 10
Daesung HM-TX-315 User Manual preview
HM-TX-315
Brand: Daesung Pages: 9
Pontiac 2010 Vibe Owner'S Manual preview
2010 Vibe
Brand: Pontiac Pages: 318
Anker Technology Roav VIVA Owner'S Manual preview
Roav VIVA
Brand: Anker Technology Pages: 8
Rugged Ridge 11232.20 Quick Start Manual preview
11232.20
Brand: Rugged Ridge Pages: 2
POOL-LINE 110085 Assembly Instructions preview
110085
Brand: POOL-LINE Pages: 2
Safe Fleet Prime Design VBI-FT31B Assembly Instructions Manual preview
Prime Design VBI-FT31B
Brand: Safe Fleet Pages: 12
Cadillac Escalade 2004 Escalade ESV Owner'S Manual preview
Escalade 2004 Escalade ESV
Brand: Cadillac Pages: 472
Curt Group Aries AL235045 Installation Manual preview
Aries AL235045
Brand: Curt Group Pages: 2
CITROEN CX 2000 Repair Manual preview
CX 2000
Brand: CITROEN Pages: 394
Kargo Master 409CD Installation Manual preview
409CD
Brand: Kargo Master Pages: 7
Kia Soul 2018 Owner'S Manual preview
Soul 2018
Brand: Kia Pages: 673
TOP VEHICLE TECH GRKRT01 Installation Manual preview
GRKRT01
Brand: TOP VEHICLE TECH Pages: 8
XPENG P7 2023 User Manual preview
P7 2023
Brand: XPENG Pages: 316

Brands by name

Popular brands

Load more brands