Dodge 2011 Challenger SRT Owner'S Manual Download Page 402

Page: 402 / 459

Center Tail/Backup Lamp

See your authorized dealer for bulb replacement.

Center High-Mounted Stop Lamp (CHMSL)

The CHMSL uses LED lamps that are not serviceable
separately. The CHMSL must be replaced as an assembly,
see your authorized dealer.

License Lamp

1. Remove the screws securing the lamp to the rear
fascia.

2. Remove the bulb and socket assembly.

3. Disconnect the bulb from the socket assembly and
install the replacement bulb.

4. Reinstall the bulb and socket assembly.

5. Reattach the lamp to the rear fascia, and then install
the screws.

1 — License Lamp Bulb
2 — Socket

400

MAINTAINING YOUR VEHICLE

Summary of Contents for 2011 Challenger SRT












































































































































































































































































































































































































































































Search results

Summary of Contents for 2011 Challenger SRT

Reviews:

Related manuals for 2011 Challenger SRT

Brands by name

Popular brands

Dodge 2011 Challenger SRT, Owner'S Manual

Search results

Summary of Contents for 2011 Challenger SRT

Reviews:

Related manuals for 2011 Challenger SRT

Brands by name

Popular brands