XR200/XR2400F Programming Guide
Digital Monitoring Products
viii
TABLE OF CONTENTS
Page
Section
REVISIONS
Revisions to This Document
This section explains the changes that were made to this document during this revision. This section lists the date
and the change that was made, the section number and section heading, and a quick summary of the change.
Date
Section Number and Heading
Quick Explanation of Changes
5/02
2.2 Clear All Memory
Programming Prompt added to initialize all programming.
5/02
3.6 DTMF
Programming Default changed to YES
5/02
3.9 Test Frequency
Programming Default changed to 1
5/02
7.4 Cross Zone Time
Programming Default changed to 4.
5/02
17.10 462N Examples
Table revised for clarity.
3/02
3.2.4 UL AA
Check-in Time and Fail Time defaults changed to 1 (one).
1/02
3 Communication
DNET programming type removed.
1/02
12 Host Log Reports
Section added for Host Log Reports feature.
Note:
All subsequent section numbers adjusted.
1/02
17.9 462N Examples
Section added to explain how to use the 462N card with Host Log
Reports, Host Communication, and Host Backup.
12/01 3.2.1 Retry Time
Section added for new programming operation.
12/01 3.2.2 Host Backup
Section added for new programming operation.
12/01 3.2.3 Modem Setup
Section expanded for new programming operation.
12/01 3.2.4 UL AA
Section added for new programming operation.
12/01 16 Appendix
Entire section rearranged for clarity.
21/01 16.3 Using the Walk Test
Clarification added regarding bells.
12/01 16.5 Pager Direct Specifications
Information added about Pager Direct.
12/01 16.6 Cross Zoning
Clarification added about method of reporting tripped cross zones.
12/01 16.8 Modem Setup Information
Information added regarding modem setup strings.
12/02 16.9 Host Backup Examples
Scenarios for Host Backup added for clarity.
12/01 16.12 Common Keypad Examples
Section added to help troubleshoot some common keypad messages
that may appear on the keypad display.
12/01 Entire Document
New Layout.
