Digital Monitoring Products
XR200/XR2400F Programming Guide
4
1 - INTRODUCTION
1.8
Entering Non-Alpha Characters
To enter a space in an alpha entry, press the 9 digit key
followed by the third Select key. The three characters on
the 9 digit key are Y, Z, and space. You can also enter the
following characters: – (dash), . (period), * (asterisk), and
# (pound sign) using the zero key and the four Select keys
from left to right. For example, to enter a – (dash), press
the zero key and then the left Select key. A dash now
appears in the keypad display.
1.9
Keypad Prompts Display Current Programming
Each programming prompt displayed at the keypad shows the currently selected option in the panel's memory. These
options are either shown as a number, a blank, or a
NO
or
YES
. To change a number or blank to a new number, press
any top row Select key. The current option is replaced with a dash. Press the number(s) on the keypad you want to
enter as the new number for that prompt.
It is not necessary to enter numbers with leading zeros. The panel automatically right justifies the number when you
press the COMMAND key.
To change a programming prompt that requires a
NO
or
YES
response, press the top row Select key under the
response not selected.
For example, if the current prompt is selected as
YES
and you want to change it to
NO
, press the third top row
Select key. The display changes to
NO
. Press the COMMAND key to go to the next prompt. See Figure 5.
BELL TST YES
Press a top row select key.
BELL TST NO
The keypad display changes to the newly
selected option. Press COMMAND.
NEXT
Figure 5: Changing the Current Programming Option
9
0
1
2
3
4
5
6
7
8
COMMAND
ABC
(
DEF
)
GHI
!
JKL
?
MNO
/
PQR
&
STU
$
VWX
,
YZ
(space)
'
- . * #
Figure 4: Special Characters
