dixell ichill IC260L, User Manual

Page: 34 / 105

1592015300 User manual iCHILL 200 L GB r1.3 09/09/2005
Sd 3 External air setpoint in chiller mode -30.0
-22
70.0
158
°C
°F
Dec
int
Sd 4 External air setpoint in heat pump mode -30
-22 70.0
158
°C
°F
Dec
int
Sd 5 External air differential in chiller mode -30.0
-54
30.0
54
°C
°F
Dec
int
Sd 6 External air differential in heat pump mode -30.0
-54
30.0
54
°C
°F
Dec
int
Pr1 Password 0 999
Pr2 Password 0 999
Pr3 Password 0 999
Energy saving
Parameters Description min max udm Risoluzione
ES 1 Start of the Time band 1 (0÷24) 0 24.00 Hr 10 Min
ES 2 End of the Time Band 1 (0÷24) 0 24.00 Hr 10 Min
ES 3 Start of the Time band 2 (0÷24) 0 24.00 Hr 10 Min
ES 4 End of the Time Band 2 (0÷24) 0 24.00 Hr 10 Min
ES 5 Start of the Time band 3 (0÷24) 0 24.00 Hr 10 Min
ES 6 End of the Time Band 3 (0÷24) 0 24.00 Hr 10 Min
ES 7 Monday: energy saving activated
Automatic unit on-off
0 - 0 7 - 7
ES 8 Tuesday energy saving activated
Automatic unit on-off
0 - 0 7 - 7
ES 9 Wednesday energy saving activated
Automatic unit on-off
0 - 0 7 - 7
ES 10 Thursday energy saving activated
Automatic unit on-off
0 - 0 7 - 7
ES 11 Friday energy saving activated
Automatic unit on-off
0 - 0 7 - 7
ES 12 Saturday energy saving activated
Automatic unit on-off
0 - 0 7 - 7
ES 13 Sunday energy saving activated
Automatic unit on-off
0 - 0 7 - 7
ES 14 Energy Saving setpoint offset in chiller mode -30.0
-54
30.0
54
°C
°F
Dec
int
ES 15 Energy Saving differential in chiller mode 0.0
0
25.0
45
°C
°F
Dec
int
ES 16 Energy Saving setpoint offset in heat pump mode -30.0
-54
30.0
54
°C
°F
Dec
int
ES 17 Energy Saving differential in heat pump mode 0.0
0
25.0
45
°C
°F
Dec
int
Pr1 Password 0 999
Pr2 Password 0 999
Pr3 Password 0 999
Compressors
Parameters Description min max udm Risoluzione
CO 1 Minimum compressor ON time after the start-up.
0 250
10
sec
10 sec
CO 2 Minimum compressor OFF time after the switching off.
0 250
10
sec
10 sec
CO 3 ON delay time between two compressors or compressor and valve. During
this time the led of the next resource is blinking.
1 250 Sec
CO 4 OFF delay time between two compressors or compressor and valve. During
this time the led of the next resource is blinking.
0 250 Sec
CO 5 Output time delay after the main power supply start-up to the unit.
All the loads are delayed in case of frequently power failures.
0 250
10
Sec
10 sec
Partialization (Capacity Control)
CO 6 Functioning (see Capacity Control)
0= With on/off steps
1= Continuous with steps and direct action
2= Continuous with steps and reverse action
3= Continuous with steps and direct total action
0 3
CO 7 Start-up with minimum compressor power / automatic start-unloading valve
0 = Only at the compressor start-up (Minimum power automatic start-
unloading valve off)
1= At the compressor start-up and during the termoregulation (Minimum
power / automatic start-unloading valve off)
2 = Only at the screw compressor start-up (Minimum power automatic start-
unloading valve off)
3= At the compressor start-up and during the termoregulation (Minimum
power / Unloading valve ON with compressor off)
0 3