dixell ichill IC260L User Manual Download Page 45

Page: 45 / 105

1592015300 User manual iCHILL 200 L GB

r1.3 09/09/2005

Pg.

44/105

Parameter status, leds and bottom display in Pr1

•

If the selected parameter can not be changed the leds 1 and 2 are blinking.

•

In Pr1 level the user can not see and change any parameter of Pr2 and Pr3.

•

The MENU key allows to exit from a family to reselect another without exit the Pr1 level.

•

To exit completely the programming push SET + UP.

11.6 E

NTER THE PROGRAMMING LEVEL

Enter the Pr2 “maintenance level ”:

1. Push

the

SET

DOWN

keys together for 3 seconds. The top display shows PAS while the bottom display shows Pr1 labels.

Push UP key for 2 seconds and the top display will show Pr2.

3. Push

SET

key and the top display shows a blinking 0, with

DOWN

insert the Pr2 password. Push

SET

and, if the value is

correct, top display will show the first family of parameters

“ALL”

. Otherwise set the password again.

Select a parameter family with

DOWN

keys.

5. Push

SET

to enter, the bottom display shows the first available parameter label while the top display shows its value.

The user can shows and modify all the paramters belonging to this family.

Parameter status, leds and bottom display in Pr2

•

Leds 1 / 2 are blinking: the parameter can not be changed.

•

All the leds are off:

the parameter ca not be seen in Pr1 level.

•

Led 3 is on:

the parameter can be seen in Pr1 level.

•

Leds 1 / 2 are blinking and led 3 is on: the parameter can be showed and changed in Pr2, showed but not changed in Pr1.

•

Leds 1 / 2 / 3 are blinking: the parameter can be showed and changed in Pr2 and in Pr21.

•

In Pr2 level the user can not see and change any parameter of Pr3 level.

•

The MENU key allows to exit from a family to reselect another without exit the Pr2 level.

•

The MENU key allows to pass to Pr1 starting from a family label.

•

To exit completely the programming push SET + UP.

11.7 E

NTER THE PROGRAMMING LEVEL

Enter the Pr3 “OEM level ”:

1. Push

the

SET

DOWN

keys together for 3 seconds. The top display shows PAS while the bottom display shows Pr1 labels.

Push UP key for 2 seconds and the top display will show Pr2.

Push UP key again for 2 seconds and the top display will show Pr3

3. Push

SET

key and the top display shows a blinking 0, with

DOWN

insert the Pr3 password. Push

SET

and, if the value is

correct, top display will show the first family of parameters

“ALL”

. Otherwise set the password again.

Select a parameter family with

DOWN

keys.

5. Push

SET

to enter, the bottom display shows the first available parameter label while the top display shows its value.

The user can shows and modify all the paramters belonging to this family.

Parameter status, leds and bottom display in Pr3

Summary of Contents for ichill IC260L










































































































Search results

Summary of Contents for ichill IC260L

Reviews:

Related manuals for ichill IC260L

Brands by name

Popular brands

dixell ichill IC260L, User Manual

Search results

Summary of Contents for ichill IC260L

Reviews:

Related manuals for ichill IC260L

Brands by name

Popular brands