1592015300 User manual iCHILL 200 L GB
r1.3 09/09/2005
•
Leds 1 / 2 are blinking: the parameter can not be changed.
•
All the leds are off:
the parameter is available only in Pr3.
•
Led 4 on:
the parameter can be changed also in Pr2.
•
Led 4 blinking:
the parameter is visible also in Pr2 .
•
Leds 3 / 4 on:
the parameter is available in Pr2 and in Pr1.
•
Leds 3 / 4 blinking:
the parameter is visible in Pr1 and in Pr2.
•
The MENU key allows to exit from a family to reselect another without exit the Pr2 level.
•
The MENU key allows to pass to Pr1 starting from a family label.
•
To exit completely the programming push SET + UP.
11.8 M
OVE A PARAMETER LEVEL FROM
P
R
2
TO
P
R
1
Enter Pr2 programming level
Select the parameter and if the led # 3 is off: the parameter is available only in Pr2.
To show the parameter also in Pr1:
1.
Keep pushed SET key;
2.
Push 1 time the DOWN key and the led 3 should be on, the parameter is now available in Pr1.
To hide the parameter in Pr1:
1.
Keep pushed SET key;
2.
Push 1 time the DOWN key and the led 3 should be off, the parameter is now removed from Pr1.
11.9 M
OVE A PARAMETER FROM
P
R
3
TO
P
R
2
TO
P
R
1
Enter Pr3 programming level, here the parameter are all visible:
Select the parameter, if all the leds are off the parameter is available only in Pr3.
To show the parameter also in Pr2 and Pr1:
1.
Keep pushed SET key;
2.
Push 1 time the DOWN key and the leds 3 and 4 should be on, the parameter is now available also in Pr2 / Pr1.
To show the parameter only in Pr2:
1.
Keep pushed SET key;
2.
Push 1 time the DOWN key and the leds 3 is off, the parameter is now available also in Pr2.
To show the parameter only in Pr3:
1.
Keep pushed SET key
2.
Push 1 time the DOWN key and the leds 3 and 4 are off, the parameter is now available only in Pr3.
11.10 V
ISIBILITY AND
P
ARAMETER VALUE LOCKED
To set the only visibility and lock the parameter value it is necessary enter Pr3 programming level.
Pr1 PARAMETER VISIBILITY
Enter the Pr3 level
1.
Select the parameter;
2.
Keep pushed the SET key;
3.
Push 1 time the MENU key and the led 3 change from on to blinking: the parameter is visible in Pr1 but can’t be changed.
Pr2 PARAMETER VISIBILITY
Enter the Pr3 level
1.
Select the parameter;
2.
Keep pushed the SET key;
3.
Push 1 time the MENU key and the led 4 change from on to blinking the parameter is visible in Pr2 but can’t be changed.
Leds 3 / 4 blinking: the parameter is visible in Pr1 and in Pr2 but in those levels now they can’t be changed.
TO SET THE ORIGINAL TAG FOR THE PARAMETER Pr1 / Pr2
1.
Keep pushed the
SET
key;
2.
Push one time the
MENU
key, the leds 3 / 4 turn on, the parameter can be seen and modified in Pr1 and Pr2.
11.11 P
ROGRAMMING
:
DIGITAL INPUT AND OUTPUT POLARITY
The parameters that allow to configure different options such as:
1. Digital
inputs
2.
Digital outputs (relay)
Summary of Contents for ichill IC260L
