UltiMate 3000 Series: Flow Managers and Column Thermostats
Page
20
Operating Instructions
2.7 Front Panel Display and Controls
Fig. 12: Front panel
No.
Front Panel Element Description
1
Display
Shows information about the flow manager, e.g.:
- General information upon power-up (
→
section 4.1, page 41)
- Status screen (
→
section 4.2, page 41)
- Various functions and menus that can be accessed via soft keys
(
→
section 4.3, page 42)
- Error messages (
→
section 6, page 61)
2
Standby button
Switches the flow manager to Standby mode (the LED is lighted).
To cancel Standby mode and resume operation, press the Standby button
again (the LED is not lighted).
Note
: To allow the flow manager to change the mode, press the Standby
button for at least 1 second.
3
LEDs
Power
The LED is blue when the flow manager is on.
Connected
The LED is green when the flow manager is controlled by Chromeleon.
Status
The LED is green when the flow manager has reached the target temperature
and no error has been detected.
The LED is orange when the flow manager has not yet reached the target
temperature or when the door is open.
The LED is red when an error has been detected, e.g., a leak.
1
3
2
Summary of Contents for UltiMate FLM-3100
