UltiMate 3000 Series: Flow Managers and Column Thermostats
Operating Instructions
Page
1
1 Introduction
1.1 How to Use This Manual
The layout of this manual is designed to provide quick reference to the sections of interest
to the user. However, in order to obtain a full understanding the flow manager and
thermostatted column compartment, Dionex recommends that you review the manual
thoroughly before beginning operation of the module.
Almost all descriptions in the manual apply to all flow managers of the UltiMate 3000 system
and cover both the standard (stainless steel) and biocompatible models. Therefore, the terms
"the flow manager" and/or "the FLM" are used throughout the manual. If some detail applies
to only one model or version, the model (or version) is identified by name.
Note:
The device configuration may vary (e.g., one or two column switching valves);
therefore, not all descriptions necessarily apply to your particular instrument.
The descriptions in this manual refer to firmware version 2.30 and Chromeleon
version 6.80 Service Pack 2.
The information contained in this manual is subject to change without notice and should
not be construed as a commitment by Dionex. Dionex assumes no responsibility for any
errors that may appear in this document. This document is believed to be complete and
accurate at the time of publication. In no event shall Dionex be liable for incidental or
consequential damages in connection with or arising from the use of this document.
CHROMELEON
®
is a registered trademark of Dionex. UltiMate™ is a trademark of Dionex.
All other trade or company names mentioned are subject to the copyright and the property and
trademark rights of the respective companies.
All rights reserved, including those for photomechanical reproduction and storage on
electronic media. No part of this publication may be copied or distributed, transmitted,
transcribed, stored in a retrieval system, or transmitted into any human or computer language,
in any form or by any means, electronic, mechanical, magnetic, manual, or otherwise, or
disclosed to third parties without the express written permission of Dionex.
1.2 Safety Information
The CE Mark label and cTUVus Mark safety label on the instrument indicate that the
instrument is in compliance with the related standards (
→
pages I and II).
Summary of Contents for UltiMate FLM-3100
