Dionex UltiMate FLM-3100, Operating Instructions Manual

Page: 81 / 101

UltiMate 3000 Series: Flow Managers and Column Thermostats
Operating Instructions Page 75
2. Push and remove the side panel backward, toward the rear panel (
→
Fig. 42).
Fig. 42: Removing the side panel towards the rear panel
3. Dispose of any liquid in the tray and dry the sensor (
→
Fig. 43), using lint-free cloth
or paper.
Fig. 43: Leak sensor
Important: Make sure that you do not bend or damage the sensor.
Important: Assurez-vous que vous ne tordez, ni n'endommagez le capteur.
4. Install the side panel in the reverse order.
Tip: The Status LED on the front panel remains red and the error message is
flashing on the front panel display as long as the leak sensor is exposed
to moisture.
Remove the side panel
in this direction.
Leak sensor in
the drip tray