Dionex UltiMate FLM-3100, Operating Instructions Manual

Page: 50 / 101

UltiMate 3000 Series: Flow Managers and Column Thermostats
Page 44 Operating Instructions
In general, the menu layout is as follows:
∧
> Control (1..3)
1. Temperature control
2. Valve control
3. Leak control
∨
Select Back
1
2
3
Fig. 30: Menu layout (here: Control menu)
No. Description
1 Reports the menu name and the number of items on the menu list.
2 The menu items appear on a list and are numbered consecutively.
The selected item is underlined.
3 Navigation bar (see below)
The selected menu item or parameter determines which soft keys appear on the navigation bar:
Soft Key Description
∧
- Returns you to the previous entry on a list. If the list contains 5 or more items, the arrow
up key can be used to page through the entries on the list (after reaching the first line)
(
→
Key autorepeat , page 48).
- Increments numerical values.
- Toggles between operating states e.g., on and off.
∨
Takes you to the next entry on a list. If the list contains 5 or more items, the arrow up key
can be used to page through the entries on the list (after reaching the first line) (
→
Key
autorepeat , page 48).
- Toggles between operating states, e.g., on and off.
> Takes you to the next figure in a number. Any decimal point is skipped.
Select Confirms the selection and activates the input field if applicable.
Note: If an item is read-only (e.g., because the device is connected in Chromeleon), the
Select key will not be available.
Back Returns you to the previous menu level.
Toggle Toggles between two operating states, e.g., between on and off.
OK Confirms the selection and/or input.
Cancel Cancels the action and restores the last value.
Note: Depending on the selected option, specific soft keys may replace these general soft keys.