Dino lift DINO 185XTS, Operating Instructions Manual

Page: 13 / 121

13

Do not use ladders, steps or other similar equipment on the platform.

Never throw any objects from the platform.

The lift must not be used for transferring goods or persons between different floors or
working levels.

Never disable the operation of any safety device.

Always make sure before lowering the platform that the area on the underside is
clear of any obstructions.

Avoid damaging the platform by lowering it on the ground or bringing it in contact
with any structures.

When working in busy areas the operating range of the lift must be clearly marked by
using either warning lights or fencing.

Always exercise utmost caution while driving with the platform raised.

Keep the lift free of any dirt which may impair safe operation and impede the
inspection of the structures.

The device must be serviced and inspected regularly.

Only skilled persons familiar with servicing and repair instructions are allowed to
carry out servicing and repair work.

It is strictly prohibited to use a lift which is out of order.

The lift must not be used when located on the bed of a lorry, on a trailer, on board a
vessel or in any other similar location.

Never load the platform while in the upper position.

Never exceed the maximum load of the work platform (250 kg).


The lift MUST NOT be used as a crane.

Before starting the operation, make sure that the turning device's tail overhang can
spin around without obstruction.

Always check the level position of the machine. The warning light (H17)
on the platform indicates that the inclination is too great.

Ensure that the lift cannot slide while on a gradient.

Check that there are no outsiders in the work area.