manualshive.com logo in svg

Dino lift DINO 185XTS, Operating Instructions Manual, Page: 16 / 121

Share
Download
Dino lift DINO 185XTS Operating Instructions Manual Download Page 16

 

 

16 

 

 

6. 

INSPECTIONS 

 

A thorough inspection of the lift must be carried out at least once every twelve (12) months. 
 
The inspection shall be carried out by a technically trained person who is familiar with the 
operation and structure of the lift. 
 
Draw up a protocol of the inspections and always keep it with the unit stored in the space 
reserved for it. 
 
Carry out the inspections regularly basis throughout the service life of the lift. 
 
The inspection must be carried out within twelve (12) months off the first or previous 
inspection. 
 
If the lift is used under extreme conditions, intervals between the inspections shall be 
reduced. 
 
The overall operating condition of the lift as well as the condition of the safety-related 
control devices shall be established in the regular inspections. Particular attention shall be 
paid to changes which affect the operational safety. 
 
In connection with the regular inspection, it shall be established to what extent the lessons 
and practical experience gained from the previous inspection can be implemented for even 
better safety. 
 
NOTE! National legislation must be followed first of all! 
 
Regular inspections and service measures are described more thoroughly in the chapter 
“Service- and maintenance”. 

Summary of Contents for DINO 185XTS


























































































































Reviews:

No comments