Dino lift DINO 185XTS Operating Instructions Manual Download Page 73

Page: 73 / 121

26.2.12

Check the anti-corrosive/paint coat



Check all the painted steel constructions, in particular the load-bearing structures

and welded seams for any damage in the paint coat. Grind off any rust and repaint
as necessary.



Check the box-type structures with anti-corrosion coating and renew the treatment if

necessary, using e.g. Tectyl 210R anti-corrosive agent.

26.2.13

Test run in accordance with the loading instructions



See the relevant test run instructions in point: Test loading instructions for regular

inspection

Check the structures after the test-run.

26.2.14

Draw up a protocol of the service



Save your own copy and give the other copy to the customer.

Summary of Contents for DINO 185XTS


























































































































Search results

Summary of Contents for DINO 185XTS

Reviews:

Related manuals for DINO 185XTS

Brands by name

Popular brands

Dino lift DINO 185XTS, Operating Instructions Manual

Search results

Summary of Contents for DINO 185XTS

Reviews:

Related manuals for DINO 185XTS

Brands by name

Popular brands