Dino lift DINO 185XTS, Operating Instructions Manual

Page: 31 / 121

31
12.3 Transferring, driving and steering
Driving the lift with the platform raised is only allowed on an even, firm
and level surface.
Fast transport driving is only allowed in the transport position. The boom
is parallel to the chassis, the boom extensions are fully retracted, the
boom has been lowered, and the jib arms have been lowered near to the
ground.
Be careful that the platform does not hit the ground. Lift the jib arms
slightly for driving in uneven terrain.

Check the terrain before transferring the lift.

With the work platform raised, the inclination must not exceed
5°.

With the work platform in the transport position, the inclination
must not exceed 20°.

Exercise extreme caution when driving with the work platform
raised.

Transfer of the lift is only possible from the UCB panel on the
platform.

The turning device and the jib arms can be operated during
transport driving.

The oscillation of the axle is enabled
only
when the turning
device is parallel to the chassis. (0° or 180°).
12.3.1 Driving to the front and to the rear

Activate the foot pedal (DMS1) and keep it depressed. The
signal light H16 will be illuminated and the functions of the
control switches will be activated.