2.1 Connect the DB150 to the track & transformer
1. Set the DB150’s SCALE Switch
to the scale you are running (N,
HO, O\G). Use the lowest setting (N, HO, or O/G) that will run your
layout.
2. Set the DB150’s MODE Switch to the RUN position.
3. Connect the two terminals on the DB150 marked POWER IN to the
transformer.
4. Plug in the transformer to power up your booster.
5. The DB150 will beep once and the DB150’s “POWER ON” indicator
will come on.
2.2 Plug In The UP5 Universal Panel or UR91 Radio Receiver
1. Using the short LocoNet cable provided, connect either of LocoNet
jacks on the back of the UP5/UR91 to either the A or B LocoNet
Jack on the DB150. If you are using a UR91, plug in the power sup-
ply that was included with your radio equipped set. After completing
Quick Start, see Section 4.13 for information about Universal Panel
Track Status Lights.
2. If you choose not to hook up the UP5/UR91 during the initial installa-
tion, simply plug the DT400 throttle directly into either LocoNet
Jack A or B on the DB150.
3. Remember if your set is radio equipped, please follow these quick
start instructions using your DT400R as a tethered throttle without
radio control. See Sections 22 & 23 for setting up the radio option.
2.3 Plug In Your DT400 Series Throttle
1. Plug the DT400 series throttle into either LocoNet jack on the
UP5/UR91 or DB150.
2. First, you will see the DT400 version number screen:
M O D E
O
R U N
S L E E P
P
O / G
N
H O
S C A L E
8
