4.13 UP5 Panel Hook-up
Figure 5: UP5 Assembly & Hook-up
Universal panels are shipped without front fascia panels attached. Simply use
the screws provided to attach this panel to the PC board as shown above.
The diagram below shows how to hook up your UP panel on your layout.
Instructions are also included below for hooking up the track status indicator.
This is an optional feature and the UPs will work just fine even if you do not
hook up the track status indicator to the local track section.
The RJ12 throttle jacks in the front and on the side of the UP5 should be used
for throttles or other LocoNet devices that do not have additional LocoNet con-
nections. For example, you can use one of these plugs to connect a DS54 that
is NOT daisy chained to another LocoNet device. The two RJ12 plugs in the
back of the UP5 should be used for LocoNet connections that will be daisy
chained to other LocoNet devices. For example, use the rear connectors for
daisy chaining from one UP5 to the next UP and on to the next LocoNet device
attached to the system.
If you need additional LocoNet connection jacks, you can use a six conductor
telephone jack splitter plugged into any LocoNet connection jack to give you
two connection jacks.
L O C O N E T
U N I V E R S A L P A N E L U P 5
R
R
T R A C K
S T A T U S
Black screws
on front of UP5
Silver screws
on back of UP5
UP5 Panel Assembly
Side View
PC
Board
Front View
Panel
31
