Digital Projection HIGHlite 10000Dsx+, User Manual

Page: 66 / 96

E-66
Type in a client identifier.
Mail
NOTE: To the Alert Mail feature on wireless LAN connection, select "Infrastructure"
for "Mode" in "Network Type".
Alert Mail:
Checking this box enables Alert Mail feature.
This option notifies your computer of an error message via e-
mail when using wireless or wired LAN.
Sender's Address:
Specify the senders address. Use the Software keyboard. Up
to 60 alphanumeric and symbols characters can be used. See
"Using Software Keyboard" in Appendix for more details.
SMTP Server Name:
Type in the SMTP server name to be connected to the Switcher.
Up to 60 alphanumeric characters can be used.
Recipient's Address 1 to 3:
Type in your recipient's address. Up to 60 alphanumeric and
symbols characters can be used.
Test Mail:
Send a test mail to check if your settings are correct.
NOTE: If you entered an incorrect address in a test, you may not receive an Alert
mail. Should this happen, check if the Recipient's Address is correctly set.
NOTE: Unless any one of the "Sender's Address", "SMTP Server Name" or "Recipient's
Address 1-3" is selected, "Test Mail" is not available.
NOTE: Be sure to highlight “OK” and press the ENTER button before executing
“Test Mail”.
Image Mode
Seamless
Installation of the MM-IMGPRO and MM-SCALING options per-
mits the instantaneous switching of signals between two input
interface boards when “Seamless” of the “Image Mode” is se-
lected.
• Seamless Mode - active
- Select an input
- Wait for “Transition Ready” to be displayed on the LCD screen
- Press the ENTER button to display the input.
- Next input appears immediately.
• Seamless operates between left and right input slots. The solid
lines in the following diagram are seamless switching and the
dotted lines are regular switching.
• Switching between slots on the same side is the same as Im-
age Mode set to off.
SLOT1 SLOT3
SLOT2 SLOT4
• Alpha Blending, Wipe, and Box In/Out image effects can be
selected at the time of switching. When an effect is selected it
is initiated on pressing ENTER as above.
[Before switching] [During switching] [After switching]
• The drawings show an example of how “Effect-Wipe Right” works.
NOTE: Please request installation of the MM-IMGPRO and MM-SCALING options
from your dealer or service person. The customer should never open the cabinet
under any circumstances.
2 Images (Picture in Picture)
Just like the seamless switching function, installation of the op-
tional MM-IMG2K and MM-SCALER boards, input of video sig-
nal to the left and right slots and the mode setting below allow
display of two images simultaneously.
6. Using On-Screen Menu