Digital Projection HIGHlite 10000Dsx+, User Manual

Page: 51 / 96

E-51
Store ............ Enables you to store the currently projected sig-
nal.
NOTE: This can be done by pressing CTL and ENTRY LIST buttons.
Cut ............... Enables you to remove a selected signal from
the list and place it on the "clipboard" in the Pro-
jector.
Copy ............ Enables you to copy a selected signal from the
list and place it on the "clipboard" in the Projec-
tor.
Paste ........... Enables you to paste the signal placed on the
"clipboard" to any other line of the list. To do this,
select "Paste" and then select the line number
you want to paste to. Last press ENTER.
Edit .............. Enables you to change source names or assign
the direct key.
Source Name
Enter a signal name. Up to 18 alphanumeric char-
acters can be used.
Input Terminal
Change the input terminal.
Direct key
You can assign specific remote keys for direct
signal input selection.
Lock
Set so that the selected signal cannot be deleted
when "All Delete" is executed. The changes can-
not be saved.
Skip
Set so that the selected signal will be skipped
during auto search.
When complete, select OK and press ENTER.
To exit without storing setting, select Cancel.
Select "Source Name" and press ENTER to dis-
play the Source Name Edit window. You can
change source name on this window. Press [
H
]
to display the software keyboard, which you can
enter alphanumeric characters. See page E-84
for the key function of the software keyboard.
All Delete ..... This feature enables you to delete all the regis-
tered signals in the Entry List.
The following buttons are not available for the currently project-
ing signals:
1) The Cut and Paste buttons on the Entry Edit Command screen
2) The Input Terminal button on the Entry Edit screen
Adjust (Source)
Picture
Brightness
Adjusts the brightness level or the back raster intensity.
Contrast
Adjusts the intensity of the image according to the incoming
signal.
Saturation
Adjust saturation at the white peak.
Colour
Increases or decreases the colour saturation level (not avail-
able for RGB).
Hue
Varies the colour level from +/- green to +/-blue. The red level
is used as reference. This adjustment is only valid for Video
and Component inputs (not available for RGB).
Sharpness
Controls the detail of the image for Video (not available for
RGB).
Setup Level
“7.5 IRE” must be chosen to project products manufactured in
USA.
Video Adjust (not available for RGB)
Noise Reduction
Select one of the three levels for reducing video noise: Low, Me-
dium or High.
NOTE: The lower the Noise Reduction level, the better the image quality by way of
higher video bandwidth.
Colour Matrix
Select an appropriate colour matrix for your input signal, either
HDTV or SDTV.
Y/C Delay
Adjusts Y/C delay level.
YTR Adjustment
Adjusts luminance transient time.
CTR Adjustment
Adjusts chroma transient time.
6. Using On-Screen Menu