Digital Projection HIGHlite 10000Dsx+, User Manual

Page: 36 / 96

E-36
1
Turning Off the Image
Press the MUTE PICTURE button to turn off the image for a
short period of time. Press again to restore the image.
Press the MUTE OSD button to turn off the on-screen display.
Press again to restore the on-screen display.
NOTE: You can also turn off the on-screen display forcibly by pressing and holding
CTL and then pressing MUTE OSD (Forced On-Screen Mute Mode) ; doing this
again restores it. In this case any adjustment will still change the projector's memory
settings. This mode is available even when input is switched to another or the main
power is turned off.
2
Getting the On-line Help and Information
You get the contents about Help.
Display Help
You get the source and projector information.
Press this button once to display “Source Information” and press
twice to display “Projector Information”.
Press third time to close it.
AUTO
HELP INFO
PIXEL SOUND OSD POSI/ LENS
KEY ST./ R E-LIST/ B AMP/ G
PICT/ SHUT
MUTE
AUTO
HELP INFO
PIXEL SOUND OSD POSI/ LENS
KEY ST./ R E-LIST/ B AMP/ G
PICT/ SHUT
MUTE
This function serves to store the adjusted value when using the
Shift, Focus, and Zoom buttons of the projector or the remote
control.
Reference memory:
Reference Point ...... Adjusted settings are stored in memory
as a reference common to all the input
sources. If no setting is stored in Cus-
tom Point, the adjusted settings in Ref-
erence Point will be applied.
Custom memory:
Custom Point ........... Adjusted settings are stored in memory
for each input signal.
Usage Example
When you wish to display on a screen having a 4:3 aspect ratio
an NTSC or other 4:3 aspect ratio signal and an SXGA or other
5:4 aspect ratio signal:
Perform shift, focus, and zoom adjustments to set the vertical
screen size of the vertically tall 5:4 aspect ratio signal to stan-
dard.
Both 4:3 apsect ratio signals and 5:4 aspect ratio signals can
now be displayed.
Note that with these shift, focus, and zoom adjustments, the 4:3
aspect ratio signal will become smaller on the screen.
To eliminate this size reduction, adjust the shift, focus and zoom
to the optimum condition for each of the 4:3 aspect ratio signal
and the 5:4 aspect ratio signal. Memory (storage) of each of these
values will permit projection at an optimum condition upon signal
switching.
1. Perform Zoom, Focus and Lens Shift adjustments and store
them in memory using “Set Custom Point”.
Another way to store your adjustments is to use the CTL and
INFO buttons on the remote control.
2. When “Yes” is selected for “Use Point on Signal Change”, the
adjustment is applied to the signal you switched.
3. Select “OK” and press the ENTER button for the change to
take effect.
Picture Mute during Lens Shift?
To turn off the image during lens shift, select "Yes".
NOTE: This option is only available when "Yes" is selected for "Use Point on Signal
Change?".
3
Lens Memory
4. Convenient Features