Digital Projection HIGHlite 10000Dsx+, User Manual

Page: 46 / 96

E-46
4
Menu Tree
6. Using On-Screen Menu
NOTE: The shaded item indicates the default setting.
S1: Video
S1: S-Video
S1: Component
S2: RGB
S3: None
S4: None
Entry List Load / Store / Cut / Copy / Paste / Edit / All Delete
Picture
Video Adjust
Colour Management
Gamma Correction
Image Options
Option Adjust
Lens Memory
Signal Type
Brightness / Contrast / Saturation / Colour / Hue /Sharpness /Setup Level
Noise Reduction Off / Low / Medium / High
Colour Matrix Select Colour Matrix HDTV / SDTV
Select Colour Matrix Type B-Y/R-Y / U/V / Cb/Cr /
Pb/Pr / IVX
Y/C Delay -15 to 15
YTR Adjustment 0 to 31
CTR Adjustment 0 to 31
Contrast Enhancement
0 to 63
Telecine Auto / 2:2 Off / Off
3D Y/C Separation Off / On
Vertical Detail
Colour Correction Red / Green / Blue / Yellow / Magenta / Cyan / Colour Gain
Colour Temperature Low
←→
High
White Balance Brightness R / Brightness G / Brightness B /
Contrast R / Contrast G / Contrast B
Return to Reference Ok / Cancel
Set Custom / Set Reference / Cancel
Graphics Enhanced / Graphics / NTSC / NTSC Enhanced / PAL /
SECAM2.8 / PAL / SECAM Enhanced / Gamma1.0-3.0
Pixel Adjust Clock / Phase
Position Horizontal / Vertical
Aspect Ratio 1.25:1(5:4) / 1.33:1(4:3) / 1.78:1(16:9) / 1.85:1 /
2.35:1
Resolution Auto / Native
Overscan 0% / 5% / 8% / 10%
Synchronize Off / On / Adjust
Video Filter Off / Less / More
Blanking On / Off / Top / Bottom / Left / Right
Input Resolution Horizontal / Vertical
Input Position Horizontal / Vertical
Output Position Horizontal / Vertical
Clamp Timing Mode 0-4 / Adjust
Sync Protection Upper / Lower
VD Delay Adjustment / Field Invert (On/Off)
Signal Level Red / Green / Blue
Set Custom Point / Use Custom Point
RGB / Component
Advanced Menu
Source Select
Adjust (Source)
Ref. Adjust
Factory Default
Projector Options
Tools
Help
Test Pattern
* When the interface boards are installed at the factory.