Getting Started
2-24 VAX 4000 Model 108 User Information
other than EIA-232/V.24, use one of the optional cables listed in Table 3-3 Interface
Standards and Cable Part Numbers.
To connect a peripheral to a synchronous port, follow these steps:
1. Set the on/off switch on the peripheral to the off (O) position.
2. Connect the 100-pin-to-2x50-pin cable supplied with your DSW43-AA (Figure 2-19,
item
).
3. Connect the 50-pin connector of the option cable (Figure 2-19, item
) to one of the
synchronous cable ports on the back of the system unit.
4. Connect the other connector of the option cable to the communications port on the
peripheral.
5. If the option cable connectors are fitted with screws, secure the connectors to the ports
by tightening them on each side.
6. Set the on/off switch on the peripheral to the on (l) position.
