Index
Index-3
SCSI, 2-33
External options, 2-33
connecting, 2-15
F
FCC notice, iii
Front bezel
removing, 3–10
Front view of system, 1-4
H
Hard disk
installing, front bay, 3–10
installing, rear bay, 3–14
Hardware components
front panel controls, indicators, and drive bay
locations, 1-4
keyboard, 1-18
rear panel connectors, 1-6
system unit, 1-2
Hasp
lockdown, 2-4
HSD10
analyzing device failures, 4-31
analyzing failures, 4-30
applying power, 4-9
command utility, 4-13
command utility maintenance, 4-22
controller based stripesets, 4-20
description, 4-2
device configuration, 4-7
disk and stripeset partitioning, 4-21
disktest procedure, 4-23
displaying device parameters, 4-17
DSSI ID, 4-7
exercising a disk device, 4-23
exercising a tape device, 4-24
features and capabilities, 4-3
firmware, 4-4
firmware upgrade flash boot, 4-26
flashboot update procedure, 4-27
formatting a SCSI drive, 4-22
host-based RAID support, 4-20
introduction, 4-1
LED errors, 4-30
LED indicators, 4-6
mapping devices to OpenVMS, 4-18
operation, 4-4, 4-6
SCSI ID, 4-8
setting device parameters, 4-18
setting parameters, 4-9
setting parameters from console prompt, 4-10
setting parameters from the OpenVMS prompt,
4-12
shadowing restrictions, 4-25
switches, 4-5
tapetest procedure, 4-24
transporting devices, 4-25
using tape drives, 4-26
using the console terminal, 4-16
HSD10 SCSI port
connecting devices or terminating, 2-28
I
Installation, 2-7
Installing brackets on 3.5-inch devices, 3–9
Installing external options
DSSI expansion box, 3–22
SCSI devices, 3–25
SCSI expansion box, 3–25
VAXcluster, 3–22
Installing internal options
asynchronous communications, 3–19
DHW42-BB, 3–19
DHW42-CB, 3–19
DSW43-AA, 3–18
KFDDA DSSI port, 3–20
synchronous communications, 3–18
