Console Commands
VAX 4000 Model 108 User Information A-11
•
QUART LPR register is set to 9600 baud
Example:
>>> INIT
>>>
LOGIN
Allows you to put the system in privileged console mode. When the console security
feature is enabled and when you put the system in console mode, the system operates in
unprivileged console mode. You can access only a subset of the console commands. To
access the full range of console commands, you must enter this command. This command
may only be executed in secure console mode.
The format of this command is as follows:
LO[GIN]
When you enter the command, the system prompts you for a password as follows:
Password:
You must enter the current console security password. If you do not enter the correct
password, the system displays the error message, ILL PSWD. When you enter the console
security password, the system operates in privileged console mode. In this mode, you can
use all the console commands. The system exits from privileged console mode when you
enter one of the following console commands:
BOOT
CONTINUE
HALT
START
MOVE
The MOVE command copies the block of memory starting at the source address to a block
beginning at the destination address. Typically, this command has an /N qualifier so that
blocks of data are transferred. The destination correctly reflects the contents of the source,
regardless of the overlap between the source and the data.
