HSD10 Operation
4-14 VAX 4000 Model 108 User Information
Command
Description
Parameter/Default (if
applicable)
board serial port.
FORMAT
Initiates the disk drive format utility.
HELP
Outputs a command utility help screen.
INITIALIZE STRIPESET
Initializes the adapter's internal striping
mechanisms for the specified stripeset.
/CHUNKSIZE = 1(chunk
of 4096 bytes)
MAP UNIT
Assigns an MSCP device name to a disk
device or a TMSCP device name to a tape
device.
QUALIFY
Initiates the qualify utility.
QUIESCE
Pauses SCSI bus activity on all devices
attached to the HSD10.
QUIT
Exits the Command Utility.
RENAME UNIT
Renames a (T)MSCP device name.
RESET SCSI_BUS
Forces a reset on the HSD10's SCSI bus.
RESTART
Forces a reboot of the adapter.
RESUME
Resumes activity on the quiesced SCSI
bus.
SELECT
Selects a disk or tape device for
maintenance and removes it from the pool
of physical devices.
SET CONTROLLER
Sets controller-specific configuration
values.
/DEVICE_TYPE = HS
(HSX00/HST00)
/DISK_ALCS = 0
/MAX_HOSTS = 7
/NODENAME = 211072
+module serial number
/SPINUPDELAY = 5
(seconds)
/SYSTEM_ID = same as
NODENAME
/TAPE_ALCS = 0
SET DISK
Divides a disk drive into up to eight
partitions.
SET PORT
Sets port-specific configuration values.
/ENABLE
/DISABLE
