Solving Problems
5.1 Checking Cable Connections
•
Console cable (linking the console terminal to the system unit)
•
Terminal power cord
•
System unit power cord
•
Expansion box connector cable to system unit
•
Expansion box power cord
Now, set the
l O
power switches on your equipment to the on ( | ) position, in
the following order:
1.
Turn on the expansion boxes.
2.
Turn on the console terminal.
3.
Turn on the system unit.
The power-up test display should appear. If it does not, see Section 5.2.
5.2 Using the Troubleshooting Table
Table 5–1 suggests corrective actions for certain system problems. When you
have a problem, perform the following steps:
1.
Note the symptoms of the problem.
2.
Check the symptom column in Table 5–1 for a match.
3.
Check the conditions for that symptom in the Possible Cause column. If
more than one possible cause is given, check the possible causes and their
suggested solutions in the order listed.
4.
Follow the advice in the Suggested Solution column.
5.
If the problem continues, see Section 5.11.
5–2
