Connecting to a Network
4.1 Connecting to a ThinWire Ethernet Network
Figure 4–1 Position of Network Select Button and Ethernet Lights
M K V - X 3 1 1 9 - 9 1
S t a n d a r d E t h e r n e t L i g h t
N e t w o r k S e l e c t B u t t o n
T h i n W i r e L i g h t
4.1.2 Verify Your ThinWire Ethernet Network Installation
To verify the ThinWire Ethernet installation, you must be correctly connected
to a ThinWire Ethernet network. Be sure that the ThinWire Ethernet
terminator is attached to your system unit. You also need a console terminal.
Follow these steps:
1.
Turn on your server system. A power-up display similar to the following
appears:
F_..E...D...C...B...A...9_..8...7...6...5...4_..3_..2_..1
2.
The console prompt
>>>
also appears. If the console prompt does not
appear, press the halt button on the back of the system unit.
4–2
