Connecting to a Network
4.2 Creating a ThinWire Ethernet Work Group
4.
Check that there are no branches off a ThinWire segment except through a
DEMPR multiport repeater.
A DEMPR provides eight ThinWire Ethernet connections from a single
standard Ethernet connection.
5.
Check that a ThinWire segment is not looped from one port on the DEMPR
to another port on the DEMPR.
6.
Check that the system unit’s T-connector has not been disconnected from
an operating ThinWire Ethernet segment.
CAUTION
If you need to remove a system from an active ThinWire segment,
simply disconnect the center of the T-connector from the system, as
shown in Figure 4–5.
4–7