Connecting to a Network
4.2 Creating a ThinWire Ethernet Work Group
Figure 4–5 Disconnecting T-connector
T-Connector
M K V - X 3 1 2 3 - 9 1
7.
Check that you have not disconnected a terminator from an active
ThinWire segment. This would disrupt network operation.
After you have checked all ThinWire Ethernet connections, retest the Ethernet.
Enter the following command at the console prompt:
>>> TEST 1
Return
or
>>> T 1
Return
If a connection is established, the following display and console prompt appear:
1...
>>>
If a connection is not established, the following message appears:
? 84 FAIL
4–8
