Installing Your System
2.3 Connecting System Components
2.3.5 Connect the System Unit Power Cord
Note
Make sure the
l O
power switch on the rear panel of the system unit
is off (O).
The system accepts power inputs in the ranges of 100 Vac to 120 Vac and 200
Vac to 240 Vac, at 50 or 60 Hertz. Within these limits the power supply is
self-sensing, so the system unit does not need a voltage selection switch.
Connect the supplied power cord to the power socket on the rear panel of the
system unit as shown in Figure 2–6. Connect the other end of the power cord
to a grounded power outlet.
Figure 2–6 Connecting the Power Cord
System Power Cord
M K V - X 3 1 1 3 - 9 1
2–9
