Connecting to a Network
4.1 Connecting to a ThinWire Ethernet Network
Figure 4–2 Position of Halt Button
Halt Button
M K V - X 3 1 2 0 - 9 1
3.
Enter the following command:
>>> TEST 50
Return
The system responds with another display. If the last line of the display is
NI 0100.0001, the Ethernet subsystem is working.
If a number between 0100.0002 and 0100.7000 appears on that line of the
display, there is a failure in the Ethernet subsystem.
If NI 0100.7000 or any number above 0100.7000 appears on this line, check
all Ethernet connections.
4.1.3 Connect Your System to ThinWire Ethernet Cable
To connect the server system to ThinWire Ethernet cable, follow these steps:
1.
Set the
l O
on/off switch on the back of the system unit to the off (O)
position.
2.
Attach a ThinWire cable to one side of the T-connector for the system unit.
3.
If your system is the first or last system in a single ThinWire segment,
leave the terminator attached to one side of the T-connector.
A segment is a length of cable made up of one or more cable sections
connected with barrel connectors or T-connectors.
4–3
