Digital Equipment AlphaServer 2000, Owner'S Manual, Page: 95 / 196

Verifying System Configuration
For More
Information For a more complete listing of the options that are recognized
by your Microsoft Windows NT system, you may want to enter
the SRM commands described in the next section. To enter
SRM commands, you must switch from the ARC to the SRM
console. For information about switching to the SRM console, see
‘‘Switching from ARC to SRM’’ in Chapter 1. Switch back to the
ARC console before booting the Microsoft Windows NT operating
system.
Firmware
Console
Commands for
DEC OSF/1 and
OpenVMS The following SRM console commands are used to verify system
configuration on systems running either the DEC OSF/1 or
OpenVMS operating system.
•
show config
—Displays the buses on the system and the
devices found on those buses.
• show device —Displays the devices and controllers in the
system.
• show memory —Displays main memory configuration.
•
set
and
show
—Set and display environment variable
settings.
Options and Upgrades 3–11