Digital Equipment AlphaServer 2000, Owner'S Manual, Page: 40 / 196

Turning the System On
Verify Your Configuration.
• DEC OSF/1 or OpenVMS
Use the following SRM console commands to verify your
system configuration.
— show config —Displays the buses on the system and the
devices found on those buses.
— show device —Displays the devices and controllers in the
system.
—
show memory
—Displays main memory configuration.
—
set
and
show
—Set and display environment variable
settings.
For more information about these commands, refer to
Chapter 3.
• Microsoft Windows NT
The ARC menu item
Display hardware configuration
displays the system’s hardware configuration, including the
ARC boot device names for devices installed in the system.
For more information about this menu option, refer to
Chapter 3.
For a more complete listing of the options that are recognized
by your system, you may want to enter the SRM commands
listed previously for DEC OSF/1 and OpenVMS systems.
To enter SRM commands, you must switch from the ARC
to the SRM console. For information about switching to the
SRM console, refer to ‘‘Switching from ARC to SRM,’’ earlier
in this chapter. Switch back to the ARC console before
booting the Microsoft Windows NT operating system.
1–22 Basic Operation