Digital Equipment AlphaServer 2000, Owner'S Manual

Page: 44 / 196

Powering Down the System
Powering Down the System
Before You
Begin You may not need to power down the system to recover from
some hangs and other problems. First try pressing the Reset
button on the operator control panel.
Turning Off DC
Power
To turn off your system:
1. Shut down the operating system. Refer to the shutdown
procedure in your operating system documentation.
2. After you shut down the operating system, press the DC
On/Off button to (O), as shown in Figure 1–8.
3. Set the Halt button to the ‘‘out’’ position. If the Halt button
is in, the system will not boot when you power up.
Figure 1–8 Turning Off the System
MA00065A
1–26 Basic Operation