Digital Equipment AlphaServer 2000, Owner'S Manual

Page: 62 / 196

Operating a CD–ROM Drive
Drives with Caddy
Insertion: (Figure 1–16):
1. Gather both the caddy and the disc you wish to insert.
2. If there is a protective film on the center of the caddy lid,
remove the film
!
.
3. Open the caddy by pressing the tabs on both sides of the
caddy at the end opposite the shutter
"
.
4. Set the disc, printed side up, into the caddy
#
.
5. Press firmly on both corners to close the caddy lid.
6. Insert the caddy into the drive
$
. Push the caddy gently into
the drive as far as it will go. The caddy should be completely
inside the drive when properly inserted.
The busy light comes on when the caddy has been inserted
correctly.
7. When the busy light goes off, the drive is ready to use. To
operate the drive, follow the instructions provided with your
system software.
Removal: (Figure 1–16):
1. Press the Eject button
%
. The caddy ejects part way.
2. Remove the caddy from the drive.
1–44 Basic Operation