Digital Equipment AlphaServer 2000, Owner'S Manual, Page: 141 / 196

Before You Begin
Identifying
Problems Table 4–1 lists ways to identify problems, and indicates where
each method is described:
Table 4–1 How to Identify a Problem
Method Reference
Using the troubleshooting
tables This chapter
Running diagnostic tests
test
command or
show fru
command as described in the
‘‘Console Reported Problems’’
section in this chapter.
Note
If you are running Microsoft Windows NT, switch from
the ARC to the SRM console before you can run the
test
command. For information about switching to the
SRM console, refer to ‘‘Switching from ARC to SRM’’ in
Chapter 1.
Troubleshooting the System 4–3