STAY Indicator
The STAY indicator is used to display that the system is Set in STAY Mode 1 or STAY
Mode 2. The STAY indicator will also flash in unison with the AWAY indicator when
programming various options throughout the operator’s manual.
Refer to page 11 for information on the different methods of setting in STAY Mode 1. For
information and the method of setting in STAY Mode 2, refer to page 12.
STAY Indicator
Definition
On
System Is Set In STAY Mode 1 Or STAY Mode 2
Off
System Is Not Set In STAY Mode 1 Or STAY Mode 2
Flashing Twice A Second
Zone Omitting Mode Or Setting STAY Mode 2 Zones
Flashing Once Every
3 Seconds
Day Alarm Status – Day Alarm Turned On
Table 3: STAY Indicator
System Unset
This indicator will display with the
indicator when the system has been Unset.
MAINS Indicator
The MAINS indicator is used to display that the systems AC mains supply is normal or has
failed.
MAINS Indicator
Definition
On
AC Mains Power Normal
Flashing
AC Mains Supply Has Failed
Table 4: MAINS Indicator
Off Indicator / Zone Closed
The
indicator will display when the system is in the Unset state and will flash when a
zone becomes Open during the Unset state. The indicator will stop flashing when all zones
are Closed.
On Indicator / Zone In Alarm
The
indicator will display when the system is Set in AWAY Mode and will flash when
an alarm occurs. The indicator will reset once a valid user code has been entered.
Solution
Ultima Operators Manual
9
Detection Systems
Operators Manual UK
