Call Divert Unset Sequence
This allows you to automatically disable the Call Divert sequence upon Unsetting the
system.
How To Program The Call Divert Unset Sequence
1.
Enter your Master Code followed by 3 and the # button (eg. 2580 + 3#).
Three beeps will be heard and the STAY and AWAY indicators will flash.
2.
Press button 2 followed by the # button to select the Call Divert Unset sequence.
Three beeps will be heard.
3.
Enter the Call divert disable sequence that you require (#21# PPP).
Remember that when you program a # in the Call Divert Unset sequence, you
enter *2 and when you program P (pause) in the Call Divert Unset sequence, you
enter *3.
4.
Press the # button when finished. Two beeps will be heard and the STAY and AWAY
indicators will extinguish.
Note: To disable the Call Divert Unset Sequence, enter the Call Divert sequence
as *4 (break) for Step 3.
Digit Required
Number To Program
Digit Required
Number To Program
0
0
8
8
1
1
9
9
2
2
3
3
*
*1
4
4
#
*2
5
5
4 Second Pause
*3
6
6
Break
*4
7
7
Table 8: Call Divert Set/Unset Dialling Digits
Solution
Ultima Operators Manual
23
Detection Systems
Operators Manual UK
