Communication Fail
A communication fail will register when the control panel failed to communicate with the
receiving party (eg. monitoring company, mobile phone or pocket pager etc). The
communication fault will clear once the control panel has successfully reported to the
receiving party.
To determine which receiver has failed communication, press and hold button 6.
Date and Time
Programming the date and time is only required when you need functions such as automatic
test reports automatic setting and history events to operate correctly.
How To Program The Date and Time
1.
Enter your Master Code followed by 6 and the # button (eg. 2580 + 6#).
Three beeps will be heard and the STAY and AWAY indicators will begin to flash.
2.
Enter the day, month, year, hour and minute using the (DD, MM, YY, HH, MM)
format (i.e. DD = Day of the month, MM = Month of the year, YY = Current year,
HH = Hour of the day, MM = Minute of the day).
Please note that when programming the hour of the day, you will need to use
24:00 hour format.
3.
Press the # button to exit and return to the Unset state.
Two beeps will be heard and the STAY and AWAY indicators will extinguish. If a
long beeps is heard, an error was made when entering the date and time.
Turning Outputs On/Off
This feature is only applicable if your Engineer has set up an output that can be turned on or
off via the Keypad. The output programmed by your Engineer could control a pool pump or
outside lighting etc. Up to three separate outputs may be programmed.
How To Turn An Output On or Off
1.
Enter your Master Code followed by 5 and the # button (eg. 2580 + 5#).
Three beeps will be heard and the STAY and AWAY indicators will begin to flash.
2.
Enter the output number (1 – 3) that you wish to turn on or off.
3.
Press the # button to turn the output on or press the * button to turn the output off.
Three beeps will be heard if the output is turned on and two beeps will be heard if the
output is turned off.
Repeat Step 2 and Step 3 if more than one output is required to be turned on or off.
4.
Press the # button to exit this function.
Two beeps will be heard and the STAY and AWAY indicators will extinguish.
6
Solution
Ultima Operators Manual
21
Detection Systems
Operators Manual UK
