Operation Of Keypads In Areas
Area Addressable Keypad Operations
If you have a system that has Areas with “Area Addressable” eight zone Keypads, the
operating procedure is exactly the same as described as a system with no areas except that all
operations are only relative to the area that the Keypad has been assigned to.
Master Area Keypad Operations
If you have a system that has Areas with a “Master Area” Keypad installed, the operating
procedure is exactly the same as described as a system with no Areas, except that all
operations are only relative to the area that is displayed by the “AREA DISPLAY” indicator.
Example
If the “AREA DISPLAY” displays number 2, all operations performed will only operate
Area 2. To operate Area 1, you will need to toggle the “AREA DISPLAY” indicator to
number 1 by pressing the # button. Pressing the # button again will toggle you back to Area
2 display.
Domestic Dialling
Domestic dialling can be used to call your mobile phone or a relative/friend in the event that
your control panel has activated an alarm. Up to three different telephone numbers may be
programmed for the control panel to call when alarm occurs. Only your Engineer can set the
system to report in the domestic format, however, the Master Code holder may change the
domestic telephone numbers at any time.
Acknowledging Domestic Calls
When an alarm condition occurs, the system will call the first telephone number that has
been programmed. When you answer an incoming call, you will hear the system emitting a
siren tone followed by a pause and repeat continually for two minutes (eg. siren tone – pause
– siren tone – pause).
If you do not acknowledge the call from the control panel during a pause between siren
tones, the control panel will simply hang up after two minutes has expired and call the next
telephone number.
Pressing the * button for 1 – 3 seconds during the pause will acknowledge the call and no
further calls will be made for that event. If the call has been successfully acknowledged, a
tone of decreasing pitch will be heard.
Digit Required
Number To Program
Digit Required
Number To Program
0
0
8
8
1
1
9
9
2
2
3
3
*
*1
4
4
#
*2
5
5
4 Second Pause
*3
6
6
Break
*4
7
7
Table 9: Domestic Dialling Telephone Digits
Solution
Ultima Operators Manual
27
Detection Systems
Operators Manual UK
